Charmlite Cup
1 / 3
Adding coins: Push coins through the slot one at a time. The LCD Display will blink showing the value of each coin. When it stops blinking, it will display the total.
Alternate way to add coins: Remove the lid. Add coins to the Bank. Attach the lid. Press the Add Coin Button until it displays the total amount of coins you added. To speed the display up, hold the button down.
Subtracting coins: Remove the lid. Subtract coins from the Bank. Attach the lid. Press the Subtract Coin Button until it displays the total amount of coins you subtracted. To speed the display up, hold the button down.
Resetting the LCD Display: Insert the end of a paperclip or similar object into the reset hole on the underside of the lid.
Clean with a slightly damp cloth. Never soak or submerge in water. Store in a cool, dry location away from sunlight.
When changing batteries, adult supervision is recommended. We recommend using alkaline batteries for best performance. Locate the battery door on the underside of the lid. Using a Phillips screwdriver, remove the screw. Insert 2 “AAA” batteries in the polarity direction shown on the diagram to the right. Replace the battery door.
Note: When the LCD Display starts to fade, it's time to change the batteries. The display memory stays on for only 15 seconds after the batteries are removed. Have 2 new “AAA” batteries ready before removing the old batteries.
Do not mix and new battery Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Insert batteries using the correct polarity. Do not short-circuit the supply terminal. Remove batteries when not in use.
You can add coins by pushing them through the slot one at a time. Alternatively, you can remove the lid, add coins directly to the bank, reattach the lid, and press the Add Coin Button until the correct total is displayed.
Remove the lid and take the coins out of the bank. Reattach the lid, then press and hold the Subtract Coin Button until it displays the total amount of coins you subtracted.
To reset the display, insert the end of a paperclip or a similar thin object into the reset hole located on the underside of the lid.
Clean the bank using a slightly damp cloth. Never soak or submerge the unit in water. Store it in a cool, dry place away from direct sunlight.
Adult supervision is recommended. Use 2 new "AAA" alkaline batteries. Note that the display memory stays active for only 15 seconds after old batteries are removed, so have the new batteries ready before starting.
Do not mix old and new batteries. Do not mix alkaline, standard (carbon-zinc), or rechargeable (nickel-cadmium) batteries. Always insert batteries using the correct polarity, do not short-circuit the supply terminal, and remove them when not in use.
